Cobb Tuning AccessPORT for 2008-12 WRX (2.5L)

FREE OVERNIGHT SHIPPING on all (in stock) Cobb AccessPORTS!  (Continental U.S. only)

No cutting, wiring or soldering! Simple plug-and-play functionality via the OBD-II diagnostic port! ... The Cobb AccessPORT is the ultimate personal tuning solution for your 08-12 Subaru WRX . Reprogram your vehicle's computer (ECU) by selecting one of the pre-installed performance "maps" that automatically optimize settings such as the air/fuel ratio, ignition timing, boost and more... for performance results you can instantly feel! These pre-installed maps are also refered to as "off-the-shelf" (OTS) base maps. Pre-loaded are stage 1 (stock car) & stage 2 (turboback exhaust) maps. These OTS maps recalibrate the appropriate sensors and modify tables with more aggressive settings. The result is increased power output, improved response and better driveability, since all of the components are working together in harmony.

However, your not limited to just the stage 1 & stage 2 maps. The beauty of the AccessPORT is that it can continue to grow with additional modifications beyond the scope of the OTS maps. For more extreme modifications, Cobb Tuning AccessTUNER software can be used (via laptop) to create custom tuned maps that match all of your modifications perfectly. Cobb's extensive network of professional tuners are available to custom dyno tune "Pro-Tune" any modification configuration. For those that want to take on the challenge of tuning their own vehicle, AccessTUNER Race is downloadable software with all of the tuning capabilities as used by Cobb Tuner professionals.

However, the AccessPORT is so much more than just a reflash device. It allows you to monitor your fuel economy (average and real time), perform performance tests in order to estimate your 0-60mph and 1/4 mile time, read and decipher ECU trouble codes (CELs), and monitor live data via the OEM vehicle sensors which eliminates the need for costly aftermarket gauges. Features are listed below...

Base Map Power Gains:

2008 WRX (2.5L)
Stage1: +9% HP/ +10% LB. FT (stock car - no other modifications)
Stage2: +13% HP/ +14% LB. FT (requires Turboback exhaust)

2009-12 WRX (2.5L)
Stage1: +13% HP/ +17% LB. FT (stock car - no other modifications)
Stage2: +15% HP/ +24% LB. FT (requires Turboback exhaust)

Map Downloads & Notes: Click Here

Unlike other tuning options, the AccessPORT is truly unique in its capabilities that go far beyond typical “chipping” or “reflashing” solutions.  This is where the AccessPORT clearly stands out from the competition:

	Simple Installation - Just about anyone with even the most basic of automotive knowledge can quickly and easily install an AccessPORT. No computers, wire cutting/splicing or tools of any kind are required. The Cobb Accessport installs via the under-dash OBD-II diagnostic port.
	Base Maps - COBB Tuning provides several preloaded maps for common power modifications. Each base map is dyno developed and rigorously tested in multiple COBB Tuning facilities across the country These tests cover the spectrum of altitude, temperature, humidity, octane and fuel quality variables to ensure proper calibration and performance wherever the car is driven.
	Change Maps - Since all base maps and custom tune maps are stored in the AccessPORT, you can change maps any time you want.  Switch to a race gas map for that extra performance at the track. Go to the Fuel Economy map for those long boring drives.  Load the Valet map to keep revs below 3,200 when you drop your car off with the parking attendant. The Anti-Theft map does not allow the car to start, keeping it safe in suspect areas or during extended parking.
	Performance - Turn on your own portable performance evaluation suite! Measure 0-60mph time, 60 foot and 1/4 mile ET’s and Trap Speed. Switch to Dynamometer simulation and calculate your vehicle’s horsepower and torque.
	Live Data - Monitor OEM sensor data on-the-fly. Use the AccessPORT as an additional gauge to monitor a huge number of signals, like: RPM, Coolant Temp., Battery Voltage, Intake Air Temp., Ignition Timing, Mass Air Flow, Cam Advance & Retard, Boost and many more!
	Datalogging - Onboard datalogging allows multiple channels of data to be recorded simultaneously for later review. This allows for analysis of current engine performance.  Datalogs can be sent to professional tuners to provide additional power gains remotely through email! **
	ECU Settings - Quickly adjust ECU settings to give you more control of your car’s capabilities.  Enable Launch Control and set your desired launch RPM for the perfect hole shot. Turn on Flat-Foot shifting to keep boost up during gear changes. Adjust idle speed and ignition timing in real time.
	Trouble Codes - The AccessPORT allows you to read engine codes to troubleshoot issues and potentially save you from an expensive trip to the dealership. Once the issue is resolved, clear the codes and turn off the check engine light.
	Uninstall - In the event the car must be returned to the stock configuration, the AccessPORT can be completely removed and the ECU restored to its factory condition. Perfect for trips to the dealership.